SUMMARY
Energy can cross the boundaries of a closed system in the form of heat or work. For control volumes, energy can also be trans- ported by mass. If the energy transfer is due to a temperature difference between a closed system and its surroundings, it is
Work is the energy transferred as a force acts on a system through a distance. The most common form of mechanical work is the boundary work, which is the work associated with the expansion and compression of substances. On a P-V diagram, the area under the process curve represents the boundary work for a quasi-equilibrium process. Various forms of work are expressed as follows:
Related posts:
Case studies:Benefits given by the use of environmental temperature control using reciprocating PD p...
Air only relationships:Air flow rate control
Energy and Efficiency:ENERGY GENERATION AND DISPERSAL
BASIC DIAGRAMS AND SYSTEMS:FLUID POWER SYSTEMS
AIR DRYERS:DRY AIR DISTRIBUTION SYSTEM
Low pressure and vacuum:Screw feeders and The simple screw feeder.
Design procedures:The use of equations in system design and Logic diagram for system design.
Control components in a hydraulic system:Shock absorbers
Maintenance and troubleshooting:Safety
Process control pneumatics.
Fundamental Principles:Work, energy and power
INTRODUCTION TO THERMAL-FLUID SCIENCES
BASICCONCEPTS OF THE RMODYNAMICS:CLOSED AND OPEN SYSTEMS
BASICCONCEPTS OF THE RMODYNAMICS:STATE AND EQUILIBRIUM
ENTROPY:REVERSIBLE STEADY-FLOW WORK