Pressure at a point
Determine the total force on a wall of an open tank 2m wide containing fuel oil of density 924 kgm-3 at a depth of2 m.
Solution
To determine the pressure at a point in the static liquid below the free surface, consider the equilibrium forces on a wedge-shaped element of the liquid.
Resolving in the x-direction
Related posts:
Case studies:Benefits given by the use of environmental temperature control using reciprocating PD p...
Selection process retrofitting to existing equipment:Flow charts
Compressed Air Transmission and Treatment:Water vapour
CONTROL VALVES:Pressure Regulators
High pressure:Single blow tank control
Low pressure and vacuum:Screw feeders and The simple screw feeder.
Pressure and flow:Application of Pascal's law.
Fine material:Conveying data
Material property influences:Dense phase sliding bed flow
Control components in a hydraulic system:Meter-out operation
Hydraulic pumps:Principle of operation.
Application notes: Regeneration ,Counterbalance and dynamic braking ,Pilot-operated check valves ,P...
Fundamental Principles:IndustrIal PrIme movers
ENTROPY:ISENTROPIC PROCESSES
GAS MIXTURES AND PSYCHROMETRICS:P-v-T BEHAVIOR OF GAS MIXTURES: IDEAL AND REAL GASES