GAS MIXTURES AND PSYCHROMETRICS:DEW-POINT TEMPERATURE

DEW-POINT TEMPERATURE

If you live in a humid area, you are probably used to waking up most summer mornings and finding the grass wet. You know it did not rain the night before. So what happened? Well, the excess moisture in the air simply condensed on the cool surfaces, forming what we call dew. In summer, a considerable amount of water vaporizes during the day. As the temperature falls during the night, so does the “moisture capacity” of air, which is the maximum amount of moisture air can hold. (What happens to the relative humidity during this process?) After a while, the moisture capacity of air equals its moisture con- tent. At this point, air is saturated, and its relative humidity is 100 percent. Any further drop in temperature results in the condensation of some of the moisture, and this is the beginning of dew formation.

The dew-point temperature Tdp is defined as the temperature at which condensation begins when the air is cooled at constant pressure. In other words, Tdp is the saturation temperature of water corresponding to the vapor pressure:

GAS MIXTURES AND PSYCHROMETRICS-0034GAS MIXTURES AND PSYCHROMETRICS-0035

This is also illustrated in Fig. 9–19. As the air cools at constant pressure, the vapor pressure Pυ remains constant. Therefore, the vapor in the air (state 1)

undergoes a constant-pressure cooling process until it strikes the saturated vapor line (state 2). The temperature at this point is Tdp, and if the temperature drops any further, some vapor condenses out. As a result, the amount of vapor in the air decreases, which results in a decrease in Pυ. The air remains saturated during the condensation process and thus follows a path of 100 percent relative humidity (the saturated vapor line). The ordinary temperature and the dew-point temperature of saturated air are identical.

You have probably noticed that when you buy a cold canned drink from a vending machine on a hot and humid day, dew forms on the can. The formation of dew on the can indicates that the temperature of the drink is below the dew-point temperature of the surrounding air (Fig. 9–20).

The dew-point temperature of room air can be determined easily by cooling some water in a metal cup by adding small amounts of ice and stirring. The temperature of the outer surface of the cup when dew starts to form on the surface is the dew-point temperature of the air.

GAS MIXTURES AND PSYCHROMETRICS-0036GAS MIXTURES AND PSYCHROMETRICS-0037

Related posts:

Pumps:Pumps in series switched to meet demand
Compressed Air Transmission and Treatment:Regulating valves
System selection considerations:Pipeline conveying capacity.
Air flow rate evaluation:Supply pressure and Volumetric flow rate.
CONTROL VALVES:SHUTTLE VALVES
THE COMPRESSOR:COMPRESSOR CONTROLS
THE COMPRESSOR:COMPRESSOR INSTALLATION.
Erosive wear:Data sources and Issues considered.
Control components in a hydraulic system:Flovvrneters.
Material property influences:Dense phase plug flow
Hydraulic accessories:Heat exchangers
Linear actuators:Mounting arrangements and Cylinder dynamics.
Air Compressors, Air Treatment and Pressure Regulation:air receivers and compressor control
PROPERTIES OF PURE SUBSTANCES:PHASES OF A PURE SUBSTANCE
GAS MIXTURES AND PSYCHROMETRICS:ADIABATIC SATURATION AND WET-BULB TEMPERATURES

Leave a comment

Your email address will not be published. Required fields are marked *