SUMMARY
Radiaton heat transfer between surfaces depends on the orientation of the surfaces relative to each other, the effects of orientation are accounted for by the geometric parameter view factor. The view factor from a surface i to a surface j is denoted by Fi ® j or Fij, and is defined as the fraction of the radiation leaving surface i that strikes surface j directly. The view factors between differential and finite surfaces are expressed as differential view factor is expressed as
Related posts:
Case studies:Variable speed drives on water pumps supplying a ring main at a domestic appliance fact...
Motors:Types of electric motors
Actuators:selection and performance of cylinders
Applications on pneumatic:Air films
Compressed Air Transmission and Treatment:Carbon dioxide
Compressed Air Transmission and Treatment:Activated carbon adsorption
Pipelines and valves:Isolating valves and Butterfly valves
THE COMPRESSOR:COMPRESSOR CONTROLS
Material property influences:Dicalcium phosphate
COMPRESSORS:Liquid Seal Ring Compressors
Pressure and flow:Fluid types
PROPERTIES OF PURE SUBSTANCES:PHASES OF A PURE SUBSTANCE
THE FIRST LAW OF THERMODYNAMICS:ENERGY BALANCE FOR STEADY-FLOW SYSTEMS
POWER AND REFRIGER A TION CYCLES:DEVIATION OF ACTUAL VAPOR POWER CYCLES FROM IDEALIZED ONES
POWER AND REFRIGER A TION CYCLES:HOW CAN WE INCREASE THE EFFICIENCY OF THE RANKINE CYCLE?