Pressure and flow:Pascal’s law.

Pascal’s law

The underlying principle of how fluids transmit power is revealed by Pascal’s law. Pascal’s law states that the pressure applied to a confined fluid is transmitted undiminished in all directions. This law forms the basis for understanding the relationship between force, pressure and area, which can be mathematically expressed as:

Force = Pressure x Area or

Pressure =Force /Area

The transmitted pressure acts with equal force on every unit area of the containing vessel and in a direction at right angle to the surface of the vessel exposed to the liquid.

Pascal’s law can be illustrated by the following example.

A bottle is filled with a liquid, which is not compressible. A force of 4 kg is applied to the stopper whose surface area is 3 cm2• Let’s assume that the area of the bottle bottom is 60 cm2• If the stopper is inserted into the bottle mouth, with a force of 4 kg such that it

makes contact with the liquid, then the pressure exerted by the stopper on the liquid in the bottle is given by:

image

This force could break most bottles. This shows why a glass bottle filled with liquid can break if the stopper is forced into its mouth.

Pressure and flow-0035

Related posts:

Pumps:Positive displacement pumps
Pumping system hydraulic characteristics:Pump curves and Pump operating point.
Energy and Efficiency:Overall advantages of compressed air
Air flow rate evaluation:The influence of altitude and Atmospheric pressure.
Gas–solid separation devices:Dust control and Particle degradation
Material property influences:Dense phase plug flow
ACTUATORS:PISTON Roo COLUMN STRENGTH AND HYDRAULIC CYLINDER FORCES.
FORCES IN LIQUIDS:LIQUIDS AT REST (HYDROSTATICS)
Pressure and flow:Flow measurement.
Compressor types:Piston compressors,Screw compressors,Rotary compressors and Dynamic compressors.
Process Control Pneumatics:volume boosters
Sequencing Applications:Programmable controllers
INTRODUCTION AND OVERVIE:FLUID MECHANICS
BASICCONCEPTS OF THE RMODYNAMICS:THE MANOMETER
PROPERTIES OF PURE SUBSTANCES:INTERNAL ENERGY, ENTHALPY, AND SPECIFIC HEATS OF IDEAL GASES

Leave a comment

Your email address will not be published. Required fields are marked *