Colour filter less 3-panel HTPS projector
In the 3-panel HTPS projection system that does not use a colour filter, incident white light is split into three primary colours by dichroic mirrors/filters before going to the x-cube core of the light engine. Each primary colour passes through an HTPS LV sandwiched between two-sheet polarisers in the same way as the traditional AMLCD. A dichroic x-cube is used to combine the three colours immediately before the projection lens as illustrated in Figure 19.7.
A complete breakdown of a practical 3-panel filterless light engine used by Sanyo is shown in Figure 19.8.
Related posts:
Plasma panels:Introduction to flat panel displays
DC power generation:CRT television power requirements
Projection systems:CRT-based projection systems
Liquid crystal display (LCD):Polarity inversion
POWER SUPPLY SYSTEMS:SERVICING POWER SUPPLY UNITS.
Television receivers CRT-type:Synchronous demodulator
POWER SUPPLY SYSTEMS:HYBRID SWITCHER IC AND CAUTION LIVE MAINS.
AERIALS AND RECEIVERS:SOUND DEMODULATION AND FREQUENCY-SYNTHESIS TUNING.
Flat panel television receivers:Soft-switching resonant d.c.–d.c. converters
DVD:The photodiode detector assembly
MPEG encoding:The complete DCT coder
MPEG encoding:Coding of DCT coefficients
Magnetic tape recording:Magnetic tape basics
Flat panel television receivers:De-gamma correction and error and diffusion
VIDEORECORDER SIGNAL PROCESSING:COLOUR-UNDER SYSTEM