Colour filter less 3-panel HTPS projector
In the 3-panel HTPS projection system that does not use a colour filter, incident white light is split into three primary colours by dichroic mirrors/filters before going to the x-cube core of the light engine. Each primary colour passes through an HTPS LV sandwiched between two-sheet polarisers in the same way as the traditional AMLCD. A dichroic x-cube is used to combine the three colours immediately before the projection lens as illustrated in Figure 19.7.
A complete breakdown of a practical 3-panel filterless light engine used by Sanyo is shown in Figure 19.8.
Related posts:
MPEG-2 transport stream:Transport stream packet
DVD:Playback start-up routine and CD/DVD detection
DIGITAL CAMCORDERS AND VCRS:VIDEO DATA PROCESSING.
The digital TV reception:Transport demultiplexing and MPEG decoding
SURROUND-SOUND AND HOME CINEMA:DOLBY DECODERS.
TEST EQUIPMENT AND FAULT DIAGNOSIS:TRACING INTERMITTENT FAULTS.
MPEG encoding:Quantising the DCT block
POWER SUPPLY SYSTEMS:BURST-MODE PSU CHIP.
Magnetic tape recording:Frequency-multiplex audio
DC power generation:High-frequency chokes and Start-up and soft start.
TAPE DECK MECHANICS AND SERVICING:TAPE DECK MECHANICS AND SERVICING.
Flat panel television receivers:Operating modes
TV AND VIDEO WAVEFORMS AND STANDARDS:COLOUR ENCODING,VISION MODULATIONAND AM MODULATION.
Magnetic tape recording:Modulation system
CONTROL SYSTEMS:THE I2C BUS