Line Impedance Tables
This section has several tables of impedances for all-aluminum, ACSR, and copper constructions. All are based on the equations in the previous section and assume GMD = 4.8 ft, conductor temperature = 50°C, GMDfN = 6.3 ft, and earth resistivity = 100 W-m. All zero-sequence values are for a four-wire multigrounded neutral circuit.
Related posts:
Criteria and Tools for Evaluating Wind Power Converter:Importance of Thermal Stress in Wind Power Co...
Direct-Current Voltage Testing of Electrical Equipment:Lightning Arresters
General Overview:New European Energy Initiatives
COAL-FIRED POWER PLANTS:CARBON DIOXIDE SEQUESTRATION
HVDC Transmission for Offshore Wind Farms:Challenges of Offshore Wind Energy
Principles of electrical safety:Precautions against explosions
Circuit-Level Transient Suppression:Protecting Telco Lines
Cables and Accessories:Cable Failures and Their Analysis
Introduction to The Current Situation and Perspectives on the Use of Wind Energy for Electricity Gen...
Conversion Efficiency Improvement in GaAs Solar Cells:FDTD Software for the Simulation of Nanostruct...
Capacitor Application:Reliability
The Current Situation and Perspectives on the Use of Solar Energy for Electricity Generation:Czech R...
Motors and Generators:Insulation Condition
NATURAL GAS–FIRED GAS TURBINES AND COMBINED CYCLE POWER PLANTS:GAS TURBINE DEVELOPMENT
HYDROPOWER:HYDROPOWER SITES