Line Impedance Tables
This section has several tables of impedances for all-aluminum, ACSR, and copper constructions. All are based on the equations in the previous section and assume GMD = 4.8 ft, conductor temperature = 50°C, GMDfN = 6.3 ft, and earth resistivity = 100 W-m. All zero-sequence values are for a four-wire multigrounded neutral circuit.
Related posts:
High-frequency power supplies.
The Current Situation and Perspectives on the Use of Hydropower for Electricity Generation:Hydroelec...
Electrical Power System Grounding and Ground Resistance Measurements:Ground Grid Integrity Measureme...
Capacitors:Basic Principles
Low-Voltage Switchgear and Circuit Breakers:Air Disconnect Switches, Fuses, and Insulators
Underground Distribution:Installations and Configurations
Grounding Tower Elements:Facility Ground Interconnection.
Thermal Stress of 10-MW Wind Power Converter Under Normal Operation:Stress of Converter Imposed by G...
Mechanical and duty cycle considerations.
The Current Situation and Perspectives on the Use of Wind Energy for Electricity Generation:Wind Ene...
COMBINED HEAT AND POWER:NUCLEAR POWER
The Current Situation and Perspectives on the Use of Wind Energy for Electricity Generation:Sweden
COAL-FIRED POWER PLANTS:COAL TREATMENT AND LOW NITROGEN OXIDE COMBUSTION STRATEGIES
The Current Situation and Perspectives on the Use of Biomass in the Generation of Electricity:Italy
AN INTRODUCTION TO ELECTRICITY GENERATION:RENEWABLE ENERGY AND DISTRIBUTED GENERATION