Clogged-Filter Indicator
The clogged-filter indicator shown in Figures 12-13 and 12-14 is used with Trane electronic air cleaners to sense pressure conditions in the blower chamber between the unit and the blower. An increase in pressure indicates a clogged filter, and this condition will be indicated by the light on the room thermostat control (see Figure 12-12) or when the clogged-filter indicator on the furnace shows red.
The clogged-filter indicator should be located on a rigid sheet- metal mounting surface to prevent bumps or other vibrations from tripping the indicator. It should also be located where it can prop- erly sense the pressure conditions.
Related posts:
Hydronic Heating Systems:Combination Pipe Systems , Zoning a Two-Pipe System and Radiant Panel Heati...
DESIGNING A RADIANT HEATING SYSTEM (BOILER AND CIRCULATING PUMP)
Air-Conditioning:Cooling a Structure and External Sources of Heat.
Boiler and Furnace Conversion:Oil Tanks and Oil Piping
Coal Furnaces,Wood Furnaces, and Multi-Fuel Furnaces:Chimneys and Chimney Troubleshooting
Pipework and oil traps:Oil separators
Steam and Hot-Water Space Heating Boilers:Purging Air from the System and Expansion Tanks
Closed System Cycles:Diesel Cycle
Radiators, Convectors, and Unit Heaters:Gas-Fired Unit Heaters