1. H. Sequenz, The Windings of Electrical Machines, Vol.3., A.C. Machines, Springer Verlag, Vienna, 1950 (in German).
2. M.M. Liwschitz–Garik, Winding Alternating Current Machines, Van Nostrand Publications, 1950.
3. M. Bhattacharyya, Pole Amplitude Modulation Applied to Salient Pole Synchronous Machines, Ph.D. thesis, University of Bristol, U.K, 1966.
4. G.H. Rawcliffe, G.H. Burbidge, W. Fong, Induction Motor Speed Changing by Pole Amplitude Modulation, Proc IEE, Vol.105A, August, 1958.
5. B.J. Chalmers, Interspersed A.C. Windings, Proc. IEE, Vol.111, 1964, pp.1859.
6. C. Zhang, J. Yang, X. Chen, Y. Guo, A New Design Principle for PoleChanging Winding–the Three equation Principle, EMPS Vol.22, No.2, 1994, pp.187 – 189.
7. M. Poloujadoff, J.C. Mipo, Designing 2 Pole and 2/4 Pole Windings by Simulated Annealing Method, EMPS, Vol26., No.10, 1998, pp.1059 – 1066.
1. M.V. Cistelecan, E. Demeter, A New Approach to the Three-phase Monoaxial Nonconventional Windings for A.C. Machines, Rec. of IEEE – IEMDC, 99, Seattle, U.S.A., 1999.
2. M.V. Cistelecan, E. Demeter, A Closer Approach of the Fractional Multilayer Three-phase A.C. Windings, Rec. of Electromotion – 1999, Patros, Greece, May 1999, Vol.1., pp.51 – 54.
3. B. Chalmers, A Williamson, A.C. Machines: Electromagnetics and Design, Research Studies Press Ltd., Somerset, England, 1991, pp.28.
4. D.M. Ionel, M.V. Cistelecan, T.J.E. Miller, M.I. McGilp, A New Analytical Method for the Computation of Air–gap Reactances in 3–phase Induction Motors, Rec. of IEEE – IAS – 1998 Annual Meeting, Vol.1.
5. M. Cistelecan, E. Demeter, New 3 Phase A.C. Windings with Low Spatial Harmonic Content, Rec. of Electromotion Symposium – 1997, Cluj – Napoca, Romania, pp.98 – 100.
6. W. Fong, Polyphase Symmetrization, U.K. Patent, 1964.
7. A.R.W. Broadway, Part–symmetrization of 3–phase Windings, Proc. IEE, Vol.122, July 1975, pp.125.
8. M. Bhattacharyya, G.K. Singh, Observations on the Design of Distributed Armature Windings by Poly–phase Symmetrization, EMPS Vol.19, No.3, 1991, pp.363 – 379.
9. R. Li, A. Wallace, R. Spee, Two–axis Model Development of Cage–rotor Brushless Doubly–fed Machines, IEEE Trans. Vol. EC – 6, No.3, 1991, pp.453 – 460.