1. K.P. Kovacs, I. Racz, Transient Regimes of A.C. Machines, Springer Verlag, 1985 (original edition in German, 1959).
2. R.H. Park, Two Reaction Theory of Synchronous Machines: Generalised Method Analysis, AIEE Trans. Vol.48, 1929, pp.716 – 730.
3. I. Boldea, S.A. Nasar, Dynamics of Electric Machines, MacMillan Publ. Comp., 1986.
4. C.V. Jones, The Unified Theory of Electric Machines, Butterworth, London, 1979.
5. S. Yamamura, A.c. Motors for High Performance Applications, Marcel Dekker, New York, 1986.
6. G.R. Slemon, Modeling of Induction Machines for Electric Drives, IEEE Trans. Vol. IA – 25, No.6., 1989, pp. 1126 – 1131.
7. I. Boldea, S. Nasar, Unified Treatment of Core Losses and Saturation in the Orthogonal Axis Model of Electric Machines, Proc. IEE, Vol.134, Part B. No.6, 1987, pp.355 – 363.
8. P. Vas, Simulation of Saturated Double-cage Induction Machines, EMPS Journal, Vol.25, No.3, April 1997, pp.271 – 285.
9. P.C. Krause, F. Nazari, T.L. Skvarenina, D.W. Olive, The Theory of Neglecting Stator Transients, IEEE Trans. Vol. PAS – 98, No.1, 1979.
10. G.G. Richards, O.T. Tan, Simplified Models for Induction Machine under Balanced and Unbalanced Conditions, IEEE Trans. Vol.IA – 17, No.1, 1981, pp.15 – 21.
11. N. Derbel, B.A. Kamon, M. Poloujadoff, On the Order Reduction of Induction Machine During Start up, IEEE Trans. Vol. EC – 10, No.4, 1995, pp.655 – 660.
12. M. Akbaba, Incorporating the Saturated Leakage Reactance of Induction Motors into Transients Computations, Record of ICEM – 1990, MIT, Vol.3, pp.994 – 999.
13. R.D. Slater, W.S. Wood, Constant Speed Solution Applied to the Evaluation of Induction Motor Torque Peaks, Proc. IEE, Vol.114 (10), 1967, pp.1429 – 1435.
14. I. Bendl, L. Schreier, Torque and Constant Stress of a Three-phase Induction Motor Due to Nonsimultaneous Switch on, EMPS Journal Vol.21, No.5, 1993, pp.591 – 603.
15. A.A. Shaltout, Analysis of Torsional Torques in Starting of Large Squirrel Cage Induction Machines, IEEE Trans.vol.EC – 9, No.1, 1994, pp.135 – 141.
16. S.A. Nasar, I. Boldea, Electric Machines: Dynamics and Control, CRC Press, 1993.
17. N. Retiere, M. Ivanes, D. Diallo, P.J. Chrozan, Modeling and Estudy of 3 Phase Short-circuits of a Double-cage Induction Machine, EMPS Journal, Vol.27, No.4, 1999, pp.343 – 362.
18. M. Akbaba, A Phenomenon That Causes Most Severe Transients in Threephase Induction Motors, EMPS Journal, Vol.18, No.2, 1990, pp.149 – 162.
19. P.N. Enjeti, J.F. Lindsay, Steady-state and Transient Behaviour of PWM Inverter-fed Induction Motors, EMPS Journal, Vol.16, No.1, 1989, pp.1 – 13.
20. S. Ahmed-Zaid, M. Taleb, Structural Modeling of Small and Large Induction Machines Using Integral Manifolds, IEEE Trans. Vol. EC – 6, 1991, pp.529 – 533.
21. M. Taleb, S. Ahmed-Zaid, W.W. Price, Induction Machine Models Near Voltage Collapse, EMPS Journal Vol.25, No.1, 1997, pp.15 – 28.
22. S.C. Srivastava, K.N. Srivastava, G.H. Murty, Transient Residual Voltage Analysis During Isolated Operation of a Group of Induction Motor Loads, EMPS Journal Vol.22, No.2, 1994, pp.289 – 309.
23. I.A. M.Abdel-Halim, M.A. Al-Ahmar, M.Z. El-Sherif, Transient Performance of a Group of Induction Motors with Terminal Capacitors Following Supply Disconnection, IBID Vol.26, No.3, 1998, pp.235 – 247.
24. S. Srihoran, L.H. Tan, H.M. Ting, Reduced Transient Model of a Group of Induction Motors, IEEE Trans Vol.EC – 8, No.4, 1993, pp.769 – 777.
25. R.G. Harley et al., Induction Motor Model for the Study of Transient Stability in Both Balanced and Unbalanced Multimachine Networks, IBID Vol.EC – 7, No.1, 1992, pp.209 – 215.
26. D.J.N. Limebeer, R.G. Harley, Subsynchronous Resonance of Single-cage Induction Motors, Proc IEE Vol.128B, No.1, 1981, pp.33 – 42.
27. D.J.N. Limebeer, R.G. Harley, Subsynchronous Resonance of Deep Bar Induction Motors, Proc IEE, Vol.128B, No.1, 1981, pp.43 – 51.
28. P.G. Casielles, L. Zaranza, J. Sanz, Subsynchronous Resonance in Selfexcited Induction Machines−Analysis and Evaluation, Record of ICEM 1990, MIT, Vol.3, pp.971 – 975.
29. S.A. Nasar, Electromechanical Energy Conversion in nm–winding Double Cylindrical Structures in Presence of Space Harmonics, IEEE Trans Vol.PAS – 87, No.4, 1968, pp.1099 – 1106.
30. H.A. Tolyat, T.A. Lipo, Feasibility Study of a Converter Optimised Induction Motor, Electric Power Research Institute, EPRI Final Report 2624 – 02, Jan, 1989.
31. H.A. Tolyat, T.A. Lipo, Transient Analysis of Cage Induction Machines under Stator, Rotor , Bar and End Ring Faults, IEEE Tran. Vol.EC – 10, No.2, 1995, pp.241 – 247.
32. H.A. Tolyat, M.S. Arefeen, A.G. Parlos, A Method for Dynamic Simulation of Airgap Eccentricity in Induction Machines, IEEE Trans. Vol. IA-32, No.4, 1996, pp.910 – 918.
33. St. Manolas, J.A. Tegopoulos, Analysis of Squirrel Cage Induction Motors with Broken Bars and Endrings, Record of IEEE – IEMDC – 1997, pp.TD2 – 1.1 – 1.3.
34. I. Kerszenbaum, C.F. Landy, The Existance of Large Interbar Current in Three-phase Cage Motors with Rotor Bar and/or End Ring Faults, IEEE Trans. Vol.PAS – 103, July, 1984, pp.1854 – 1861.
35. S.L. Ho, W.N. Fu, Review and Future Application of Finite Element Methods in Induction Machines, EMPS Journal, Vol.26, No.1, 1998, pp.111 – 125.
36. J.F. Bangura, H.A. Demerdash, Performance Characterisation of Torque Ripple Reduction in Induction Motor Adjustable Speed Drives Using Time Stepping Coupled F.E. State Space Techniques, Part 1+2, Record of IEEE – IAS 1998, Annual Meeting Vol.1, pp.218 – 236.