FILTERING RECTIFIER OUTPUT
Low-pass filters are used to smooth the output of any of these rectifiers by removing ac frequency components from the output. The common filter elements used to smoothen ac voltage changes are
1. Capacitors connected across the line.
2. Inductors connected in series with the line
Rectifier circuits use a single series inductor as a common filter or a choke (Fig. 9.17).
Related posts:
Motor Calculations
Installation Testing:Continuity of Protective Conductors
Audio Amplifiers:Power BJTs vs Power MOSFETs as Amplifier Output Devices
Lubrication Schedule and Bearing Life
Operation of the DC Welder Generator
Inductance:Principles of inductance
Instrumentation of an Engineering System
Introduction to AC:Generation of an Alternating EMF
Preamplifiers and Input Signals:Audibility of Distortion
Solid-State Dc Drives:Current Limit Control
DC Circuits:Parallel Circuits
Careers in Electricity and Electronics:differences between a technician and an engineer
Switch mechanisms:Rotary and key action
Troubleshooting variable speed drives:The line-commutated thyristor rectifier bridge